Give a Gift FREE Book
URL:
https://www.woodsmith.com/article/fluting-jig/
Share Page:

Fluting Jig

By: Logan Wittmer
A fluted work piece adds class and distinction to any project. This jig makes it a breeze to layout flutes.

A bookcase that I made recently has evenly spaced flutes on the face of each of the face frame stiles. A core box bit in a router is the quickest way to form these flutes. I considered using an edge guide attached to my router, but keeping consistent spacing between flutes would have been a real struggle. Not to mention the possibility of the edge guide losing contact with the stile and spoiling the cut. Instead, I built this simple fluting jig to take care of both those issues.

W214 030f01

The construction of the jig is fairly simple. It consists of a base and five guide bars all cut from 1/2" Baltic birch plywood. Two slots along each side of the base allow the guide bars to slide along the bottom of the jig once the hardware is added. These slots are easy to make with a straight bit in the router table. If there’s one critical component to the fluting jig, it’s the guide bars. The width of the bars needs to be exactly the same as the center-to-center spacing of the flutes on your project — in this case, 1/2"-wide. After they’re cut to size, drill the through holes and countersink for the machine screws.

W214 030a01

All that’s left is to drill the hole in the base for the bit to pass through and then mount your router to the base. I simply used the baseplate from my router to mark the mounting holes on the jig base. Details ‘a’ and ‘b’ show how to set up the jig.

W214 030a02

Published: July 11, 2019
Share Page:
Topics: None

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

SHN_5FreePlans_300x250

WSM Sidebar Ad_PlywoodProjectsSIB

Newsletter Articles